Pillar Bed Barreled Action

Price includes preparing stock for pillars, removing material to allow for bedding compound, mating aluminum pillars to the action, radiused or flat, complete bedding of barreled action, float barrel 100%, epoxy seal barrel channel and all interior cuts. Square bottom metal to action. Prices do not include inletting.

2 Pillars from $345
3 Pillars from $365
Large diameter and extra-long target style 3 and 4 pillar actions from $435
Anschutz 54 style round barreled action, includes installing new aluminum recoil lug from $320
Similar rimfire small O.D. barreled actions from $275

Surface Bed Action

Same exacting standards and process as pillar bedding but without the aluminum pillars. Also used to “freshen up” that old pillar bedding job by milling .100 to .125 off the existing bedding and pillars. Re-seal all interior cuts, float barrel.

Surface bed 1.370 and above actions from $275
Smaller O.D. actions from $200
Square bottom metal to action using bedding compound from $40

Inletting

Flat top stock work: complete fitting of stock to customers barreled action Complete inlet of customers barreled action to supplied flat top stock, taper barrel channel to barrel contour, or straight barrel channel, inlet for trigger guard, bolt root, bolt stop, inlet for outside removal of trigger housing where applicable, Pillar bed with Devcon and aluminum pillars, square trigger guard to bottom of action, sleeve access hole for removal of bolt stop set screw, mill for drop port and seal inside , chamfer edges, feather in all exterior cuts, blend cuts on fiberglass stocks, seal cuts on wood stocks, seal inside trigger housing area, seal barrel channel, make escutcheon for front action screw where applicable, mildly scar action below stock to prepare for glue in, rough up existing bedding for adhesion of glue in, Check function of drop port, check for all clearance around trigger housing cut in action, bolt root and bolt stop, check for removal and installation of bolt stop set screw. Prices do not include trigger guards, action screws or return S&H.

Complete inletting/bedding of drop port action with glue-in $995
No glue-in $910
No drop port or glue-in $875

Semi-inletted Blanks

Finish semi-inlet blanks:

  • complete fitting of stock to customers barreled action
  • finish inlet of customers barreled action to supplied semi-inlet stock
  • taper barrel channel to barrel contour, or straight barrel channel, inlet for trigger guard, bolt root, bolt stop, inlet for outside removal of trigger housing where applicable, Pillar bed with Devcon and aluminum pillars, square trigger guard to bottom of action, sleeve access hole for removal of bolt stop set screw, mill for drop port and seal inside , chamfer edges, feather in all exterior cuts, blend cuts on fiberglass stocks, seal cuts on wood stocks, seal inside trigger housing area, seal barrel channel, make escutcheon for front action screw where applicable, mildly scar action below stock to prepare for glue in, rough up existing bedding for adhesion of glue in, Check function of drop port, check for all clearance around trigger housing cut in action, bolt root and bolt stop, check for removal and installation of bolt stop set screw. Prices do not include trigger guards, action screws or return S&H.
Complete inletting/bedding of drop port action with glue-in $995
No glue-in $910
No drop port or glue-in $875

Install RAD Recoil System

Install RAD Recoil system. Does not include RAD system. from $155

Stock Finishing

Limited availability. Contact for Pricing.